Burners - Care and Cleaning:
  1. Remove the igniter box (2) as indicated in Igniter Box - Care and Cleaning instruction page.
  2. Remove the spring clip (8) on the rear underside of the burner.
  3. Lift the burner (9) up and towards the back of the grill, off the gas cock.
  4. Inspect the burner holes (5), primary air inlet (6) and mixing throat (7) for any signs of blockage. Clean out with compressed air or a length of wire.
  5. Use a wire brush on the outside of the burner to remove rust and dirt.
  6. Replace the burner and igniter box.
  7. It is most important that the burner be replaced correctly, without misaligning the gas cock and hence the gas injector.
  8. After assembly, check operation before replacing griddle, flame tamer or grill plate by lighting all burners and verifying that the flame characteristics are correct. See the Burner Flame Notes page for more information.