It is recommended that after any prolonged storage and at least once a year, both burner and igniter maintenance be performed.

1. Remove the 5/32" fixing bolt (1).
2. Hold the igniter box (2) and push the igniter bracket (3) down until the barbs (4) on the bracket clear the holes in the igniter box.
3. Push the igniter box (2) towards the back of the grill. Do not remove the box from the grill because it is attached by the wire.
4. Hold the igniter box against a metal surface on the grill and repeatedly press the igniter button on the front panel. A spark should be visible inside the box.
5. To re-install the igniter box, push it onto the bracket so that the two holes engage the barbs on the bracket and replace the 5/32" fixing bolt and nut (1).
6. Ensure that the igniter box is siting on the underside of the burners. If it is not, bend the igniter bracket up slightly.